Standards Policy & Procedures
Standards Subcommittee Policy & Procedures for Standards Development
IEEE/IAS/PCIC Policy & Procedures for PCIC Working Groups (Rev 14 March 2014)
IEEE 1349 Working Group Operating Procedures
Standards Overall Working Groups Chairs
The following Standards Working Groups are sponsored by the Petroleum and Chemical Industry Committee: | ||||
GROUP | STANDARD DESCRIPTION | STANDARD # | CONTACT | |
TH&S | Working Group for Electrical Installations on Shipboards (IAS/PCI/45_WG) | 45 | Dwight Alexander | |
TH&S | IEEE Recommended Practice for Electrical Installations on Shipboard | P45 | Dwight Alexander | |
IEEE Recommended Practice for Electrical Installations on Shipboard–Design | P45.1 | Norbert Doerry | ||
TH&S | IEEE Recommended Practice for Electrical Installations on Shipboard–Controls and Automation | P45.2 | Mohamed Belkhayat | |
TH&S | IEEE Recommended Practice for Shipboard Electrical Installations–Systems Engineering | P45.3 | Norbert Doerry | |
TH&S | IEEE Recommended Practice for Electrical Installations on Shipboard–Marine Sectors and Mission Systems | P45.4 | Dwight Alexander | |
TH&S | IEEE Recommended Practice for Electrical Installations on Shipboard–Safety Considerations | P45.5 | Dwight Alexander | |
TH&S | IEEE Recommended Practice for Electrical Installations on Shipboard–Electrical Testing | P45.6 | Dwight Alexander | |
TH&S | IEEE Recommended Practice for Electrical Installations on Shipboard–AC Switchboards | P45.7 | Mohammed Islam | |
TH&S | IEEE Recommended Practice for Electrical Installations on Shipboard–Cable Systems | P45.8 | Phil Laudicina | |
TH&S | Working Group for the Testing, Design, Installation, and Maintenance of Electrical Resistance Heat Tracing for Commercial Applications (IAS/PCI/515.1_WG) | 515.1 | John Turner | |
TH&S | IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Commercial Applications | P515.1 | John Turner | |
TH&S | Working Group for Electrical Resistance Heat Tracing for Industrial Applications (IAS/PCI/60079-30_WG) | 60079-30 | Rich Hulett | |
TH&S | Standard for Explosive Atmospheres – Part 30-1: Electrical resistance trace heating – General and testing requirements for Industrial Applications | P60079-30-1 | Rich Hulett / Ben Johnson | |
TH&S | Standard for Explosive atmospheres – Part 30-2: Electrical resistance trace heating – Application guide for design, installation and maintenance for Industrial Applications | P60079-30-2 | Rich Hulett / Ben Johnson | |
TH&S | Electrical Impedance, Induction, and Skin Effect Heating of Pipelines and Vessels (IAS/PCI/844WG) | 844 | Roy Barth | |
TH&S | IEEE RP for Electrical Impedance, Induction, and Skin Effect Heating of Pipelines and Vessels | P844 | Roy Barth | |
TH&S | IEEE/CSA Standard for Skin Effect Trace Heating of Pipelines, Vessels, Equipment, and Structures – General, Testing, Marking, and Documentation Requirements | P844.1 | Roy Barth | |
TH&S | IEEE/CSA Standard for Skin Effect Trace Heating of Pipelines, Vessels, Equipment, and Structures–Application Guide for Design, Installation, Testing, Commissioning, and Maintenance | P844.2 | Roy Barth | |
TH&S | IEEE/CSA Standard for Impedance Heating of Pipelines and Equipment – General, Testing, Marking, and Documentation Requirements | P844.3 | Roy Barth | |
TH&S | IEEE/CSA Approved Draft Standard for Impedance Heating of Pipelines and Equipment – Application Guide for Design, Installation, Testing, Commissioning and Maintenance | P844.4 | Roy Barth | |
TH&S | International Marine Cable Working Group (IAS/PCI/1580_WG) | 1580 | Rudy Bright | |
TH&S | Recommended Practice for Marine Cable for Use on Shipboard and Fixed or Floating Facilities | P1580 | Rudy Bright | |
TH&S | Recommended Practice for Marine Cable for Use on Shipboard and Fixed or Floating Facilities Amendment: Offshore Wind Electrical Substation Cables | P1580a | Rudy Bright | |
TH&S | Power Electronics Working Group (IAS/PCI/1662_WG) | 1662 | Yuri Khersonsky | |
TH&S | IEEE Recommended Practice for Design and Application of Power Electronics in Electrical Power Systems | P1662 | Yuri Khersonsky | |
TH&S | Standard for Power Electronics Open System Interfaces in Zonal Electrical Distribution Systems Rated Above 100 kW | P1826 | Yuri Khersonsky | |
TH&S | DC Power Systems on Ships (IAS/PCI/1709_WG) | 1709 | Yuri Khersonsky | |
TH&S | IEEE Recommended Practice for 1 kV to 35 kV Medium-Voltage DC Power Systems on Ships | P1709 | Yuri Khersonsky | |
TH&S | Subsea Electrical Working Group (IAS/PCI/SubseaElec) | 61886 | Greg Clement | |
TH&S | Subsea Equipment – Power Connectors, Penetrators and Jumper Assemblies with Rated Voltage from 3 kV (Umax = 3.6 kV) to 30 kV (Umax = 36 kV) | P61886-1 | Greg Clement | |
TH&S | Subsea Power Transformers | P61886.2 | Greg Clement | |
TH&S | Subsea Equipment – Part 3: Subsea Motors | P61886.3 | Kasey Herman | |
TH&S | Electrical Resistance Trace Heating for Industrial and Commercial Applications (IAS/PCI/P62395 WG) | 62395 | Rich Hulett | |
TH&S | Electrical Resistance Trace Heating Systems for Industrial and Commercial Applications – General and Testing Requirements | P62395-1 | Rich Hulett | |
TH&S | Electrical Resistance Trace Heating Systems for Industrial and Commercial Applications – Application Guide for Design, Installation & Maintenance | P62395-2 | Rich Hulett | |
TH&S | IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Industrial Applications | P515 | Rich Hulett | |
TH&S | Electrical Shore-to-Ship Connections WG (IAS/PCI/ShorePwr) | 80005 | Kevin Peterson | |
TH&S | IEC/IEEE International Standard – Utility connections in port — Part 1: High voltage shore connection (HVSC) systems — General requirements | P80005-1 | Kevin Peterson | |
TH&S | Utility Connections in Port — Part 1: High Voltage Shore Connection (HVSC) Systems — General Requirements Amendment 1 to IEC/IEEE 80005-1 ED2 | P80005-1a | Kevin Peterson | |
TH&S | International Standard – Utility connections in port — Part 1: High voltage shore connection (HVSC) systems — General requirements Amendment: Annex G Additional Requirements for Vehicle Carriers | P80005-1b | Kevin Peterson | |
TH&S | IEC/IEEE International Standard – Utility connections in port — Part 2: High and low voltage shore connection systems — Data communication for monitoring and control | P80005-2 | Kevin Peterson | |
TH&S | Utility Connections in Port – Part 3: Low Voltage Shore Connection (LVSC) Systems – General Requirements | P80005-3 | Kevin Peterson | |
TH&S | Utility Connections in Port – Part 4: DC Shore Connection (DCSC) Systems – General Requirements | P80005-4 | Kevin Peterson | |
ACD&M | Division 2 & Zone 2 Auxiliary Devices IAS/PCI/303_WG | 303 | Art Neubauer | |
ACD&M | RP for Auxillary Devices for Rotating Electrical Machines in Class I, Div 2 and Zone 2 Locations and Class II, Div 2 and Zone 22 Locations | P303 | Art Neubauer | |
ACD&M | Working Group for Electroytic Cell Line IAS/PCI/463_WG | 463 | Daryld Crow | |
ACD&M | Std for Electrical Safety Practices in Electrolytic Cell line Working Zones | P463 | Daryld Crow | |
ACD&M | Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors Working Group | 841 | Donald Dunn | |
ACD&M | Std for Petroleum and Chemical Industry, Premium-Efficiency, Severe-Duty, TEFC Squirrel Cage Induction Motors – Up to and Including370 kW (500 HP) | P841 | Donald Dunn | |
ACD&M | IE3, Severe-Duty, Squirrel Cage Induction Motors Working Group | 841.1 | Donald Dunn | |
ACD&M | Std for Process Industry–IE3, Severe-Duty, Squirrel Cage Induction Motors – Up to and Including 370 kW | P841.1 | Donald Dunn | |
ACD&M | ESP Working Group | 1017 | Robert Durham | |
ACD&M | RP for Field Testing Electric Submersible Pump Cable | P1017 | Robert Durham | |
ACD&M | RP for Field Testing Electric Submersible Pump Cable | P1017.1 | Robert Durham | |
ACD&M | RP for Specifying Electric Submersible Pump Cable–Ethylene-Propylene Rubber Insulation | P1017.2 | Robert Durham | |
ACD&M | RP for Specifying Electric Submersible Pump Cable–Polypropylene Insulation | P1017.3 | Robert Durham | |
ACD&M | RP for Testing and Rating of Electrical Submersible Pump Motors | P1017.4 | Robert Durham | |
ACD&M | Repair and Rewinding of Electric Motors Working Group | 1068 | Chuck Yung | |
ACD&M | Standard for the Repair & Rewinding of AC Electric Motors in the Petroleum, Chemical, and Process Industries | 1068 | Chuck Yung | |
ACD&M | Repair and Rewinding of Electric Motors Working Group | 1242 | Phil Laudicina | |
ACD&M | Guide for Specifying & Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants | P1242 | Phil Laudicina | |
ACD&M | Machines in Hazardous Locations Working Group | 1349 | Lorraine Padden | |
ACD&M | Guide for Application of Electric Motors in Class I, Division 2 & Class I, Zone 2 Hazardous (Classified) Locations | P1349 | Lorraine Padden | |
ACD&M | Guide for Application of Electric Motors in Class I, Division 2 & Class I, Zone 2 Hazardous (Classified) Locations – Corrigendum 1 | P1349-Cor 1 | Lorraine Padden | |
ACD&M | RP for the Selection, Field Testing, and Life Expectancy of Molded Case Circuit Breakers for Industrial Applications | 1458 | Gary Donner | |
ACD&M | RP for the Selection, Field Testing, and Life Expectancy of Molded Case Circuit Breakers for Industrial Applications | P1458 | Gary Donner | |
ACD&M | Working Group for Adjustable Speed AC Drives | 1566 | Rick Paes | |
ACD&M | Standard for Performance of Adjustable Speed AC Drives Rated 375 kW & Larger | P1566 | Rick Paes | |
ACD&M | Arc Flash Hazard Calculations Working Group | 1584 | Daleep Mohla | |
ACD&M | Guide for Performing Arc Flash Hazard Calculations | P1584 | Daleep Mohla | |
ACD&M | Guide for the Specification of Scope and Deliverable Requirements for an Arc-flash Hazard Calculation Study in Accordance With IEEE 1584 | P1584.1 | Daleep Mohla | |
ACD&M | Guide and Checklists for the Data Collection for Performing an Arc-flash Hazard Calculation Study in Accordance with IEEE Std. 1584 and IEEE Std. 1584.1 for Systems Operating at Three-Phase 50/60 Hz Alternating Current (AC) 1000V and below | P1584.2 | Daleep Mohla | |
ACD&M | High Pressure Conduit & Cable Seal Working Group | 1673 | Marty Cole | |
ACD&M | Standard for Requirements for Conduit & Cable Seals for Field Connected Wiring to Equipment in Petroleum and Chemical Industry Exposed to Pressures Above Atmospheric (1.5 kilopascals, 0.22 psi) | P1673 | Marty Cole | |
ACD&M | Improved Safety and Reliability in LV MCC Working Group | 1683 | Marcelo Valdes | |
ACD&M | Guide for Motor Control Centers Rated Up To 600 V AC or 1000 V DC With Recommendations Intended to Help Reduce Electrial Hazards | P1683 | Marcelo Valdes | |
ACD&M | Managing Natural Disaster Impact and Recovery | 1716 | Edward Thornton | |
ACD&M | RP for Managing Natural Disaster Impact on Key Electrical Systems and Installation in Petroleum and Chemical Facilities | P1716 | Edward Thornton | |
ACD&M | Installation Fire-Rated Cables Working Group | 1810 | Gil Shoshani | |
ACD&M | Guide for the Installation of Fire-Rated Cables, Suitable for Hydrocarbon Pool Fires for Critical and Emergency Shutdown Systems in Petroleum and Chemical Industries | P1810 | Gil Shoshani | |
ACD&M | RP for the Repair and Maintenance of Direct Current Electric Machines | 2455 | Chuck Yung | |
ACD&M | RP for the Repair and Maintenance of Direct Current Electric Machines | P2455 | Chuck Yung |